Classification and installation of the hottest mov

2022-08-20
  • Detail

Classification and installation of movable glass partitions

nowadays, movable glass partitions are very common in the decoration market, ranging from external wall windows to indoor screens, door leaves, etc. the simple classification of movable partitions is mainly divided into flat glass and special glass. Due to the uniform thickness, flat and parallel upper and lower surfaces of float glass, coupled with high labor productivity and conducive to management and other factors, Float glass is becoming the mainstream of glass manufacturing. While there are many kinds of special glass, which can not fully reconcile production and demand. Here is a detailed introduction to special glass:

1, glass brick. The manufacturing process of glass brick is basically the same as that of flat glass, except for the molding method, which is mostly used in decorative projects or transparent modeling with thermal insulation requirements

2. Cellophane. Also known as glass film has a variety of colors and decors. According to the different properties of paper film, it has different properties. Most of them have the functions of heat insulation, infrared ray protection, ultraviolet ray protection, explosion-proof, etc

3. Tempered glass. It is a kind of prestressed glass partition made of ordinary flat glass after reprocessing. Compared with ordinary flat glass, tempered glass has two characteristics: the strength of the former is several times that of the latter, the tensile strength is more than 3 times that of the latter, and the impact resistance is more than 5 times that of the latter. It is not easy to break. Even if it is broken, it will break in the form of particles without acute angles, greatly reducing the damage to human body

4. Frosted glass. It is also ground and processed on ordinary flat glass. Generally, it is less than 9 cm thick, with a thickness of more than 5 or 6 cm

5. Sandblasted glass. The performance is basically similar to that of frosted glass, and the frosted glass is changed to sandblasting. Because the two are visually similar, many decoration professionals confuse them

6. Embossed glass. It is a kind of flat glass manufactured by calendering method. Its biggest feature is transparent and opaque. It is mostly used in toilet and other decoration areas

So that the parts manufacturers can achieve a better lightweight effect on the current mass production mold without any changes to the mold. It is a kind of impact resistant flat glass made of metal wire or metal embedded in the glass plate by calendering method. When impacted, it will only form radial cracks without falling and hurting people

8. Insulating glass. Glue method is often used to keep a certain distance between the two pieces of glass. Dry air is in the distance, and the surrounding is sealed with sealing materials. It is mainly used in decoration projects with sound insulation requirements

precautions in glass construction and use:

1. Silicone sealant should be used for fixation during installation. In the installation of windows, it also needs to be used in conjunction with rubber sealing strips

2. Pay attention to fixing and adding soft pads during transportation. Generally, Shenzhen mobile partition is recommended to be transported by erecting

3. If the other side of the glass installation is closed, pay attention to cleaning the surface before installation. It is best to use a special glass cleaner, and it can be installed only after it is dry and confirmed that there is no stain. It is best to use clean construction gloves during installation

4. After the construction is completed, attention should be paid to adding anti-collision warning signs, which can generally be prompted by non dry stickers, colored electrical tape, etc. The choice of glass partition largely depends on the decoration effect of this partition after use this (17) morning. Therefore, when choosing, you need to be practical and careful in your future choices

global glass () Department

Copyright © 2011 JIN SHI